Posts Tagged ‘Tire Pressure Monitoring System’

Posted on: June 28th, 2016 by

Your tire pressure sensor will have to be reset when you install new tires and wheels onto your vehicle.   New tires are a very important safety factor for your vehicle.  Your tires can get old and dry rot, or in some a belt could break leaving them at a risk of blowing out.  Some tires have cords inside of them that will poke through the tread leaving a huge safety hazard to your driving safety.  If your car does not have a proper alignment, this could cause your vehicle’s tires to wear unevenly, putting it at risk for a blow out.  All of these things can effect  your ability  to control your vehicle.  Good tires with good tread and proper air pressure are all part of a vital safety factor for you and your family when traveling in your vehicle.

When To Add New Tires

Many garages will gauge the tread on your tires and have a rating system as to when the tread is too worn and new tires need to be put on your vehicle.  As the tread wears off of your tires, your traction between your vehicle and the roadways will lessen. You can also checkout our top article here. It is important to have your tires checked for defects or to see if they are just plain worn out by a professional mechanic or tire shop.  It is important to know what type and size of tires that are required for your vehicle.  Some vehicles may have different size tires on the front and the rear of your vehicle.  Making sure new tires and wheels are installed correctly is a vital factor.  Many people will use an experienced professional to do this for them.

How To Install Your Tire & Wheel Package

Proper Steps To Add New Wheels And Tires

  • Loosen the lug nuts on your wheels
  • Raise your vehicle high enough to give your tires clearance and block with a jack stand
  • Finish taking off the lug nuts and then remove the wheels
  • Check your lug studs and make sure they are tight and sturdy
  • Make sure your new wheels are a proper fit and alignment with the studs

Your Instillation

Make sure your tpms sensors will allign with your new set up.  Once you know your wheels are going to be a proper fit, make sure that you tires will properly fit the wheels.  Once your tires are on your wheels, put them back onto your studs and tighten them down with a lug wrench.  Put your vehicle into neutral and turn your wheels by hand to make sure there is not resistance and your new wheels will clear all components.  After driving your vehicle approximately 75 miles recheck your lug nuts and make sure that they are still secure.

Make sure that you have made the proper tire selection for your vehicle.  Your tire professional can help you select the proper fit and type.  If you need to know more you can visit this linkhttp://www.mobilemastertrucks.com/how-does-my-car-monitor-tire-pressure/ here. There are many tread types and styles to choose from.  There are also directional tires, asymmetric tires and a combination of both types.  Make sure that these are installed per manufacturers direction.  Be sure to check your tire system and reset if needed even if you are using an aftermarket tpms system.

Posted on: June 28th, 2016 by

The tire pressure sensor for automobiles manufacturers has brought on a lot of controversy.  Some of the manufacturers have used the top of line systems and their customers even though they are paying more for this service, they are pleased with the system.  Others are using cheaper versions to save on the cost of the automobiles and the consumers are not really pleased with how these systems are not user friendly.  On a normal the manufacturers of the higher end vehicles are using the better quality systems.  While others are trying to keep the costs of their vehicles down, are selecting the less expensive versions.

Why Are These Systems Good?

This system that is used on cars today, can help to save you life.  You can also checkout for more information here. These systems are designed to alert the driver by a device on the dash board of the vehicle if one of the tires are showing a lower air pressure than is recommended.   Their are various types of this system that are manufactured by different companies.  Some of these are considered as original parts, while others are considered as aftermarket parts.  The aftermarket parts are normally cheaper than the original parts.  It works the same as a brand name and a generic name.

The Pros And Cons Of Tire Pressure Monitoring Systems

Pros Of Using These Systems

  • Can save a driver from having an accident
  • Will help to extend the life of the tires
  • Will help the driver to have more control over his vehicle
  • Will alert the driver if there is an issue with uneven air pressure
  • Will help the vehicle have more traction on the roadways

Cons Of These Systems

Even with the Beru tpms system, there can be cons that will create some issues for the vehicle owners.  Some of these systems that use the valve stems to connect the sensor too, have a risk of the valve stems corroding and cause the sensor to corrode and not work properly.  Some systems will have to be reset when air is added to a tire or new tires are put on the vehicle.  Some of these reset systems can be difficult for the driver to reset, by using a series of buttons being pushed in a certain order.

These systems were created for an additional safety factor for vehicle owners and drivers.  They can help the individual auto owner to the professional businesses that own fleets of vehicles.  When these systems are working properly on a vehicle it will alert a driver that the air pressure in a tire is not to where it should be.  This can prevent being broke down on the side of the road and having to call for a service call.  It can prevent a blow out that can cause the loss of control of the vehicle and even an accident.  In the end checkout our link:http://www.mobilemastertrucks.com/tpms-road-safety-and-cost-savings/ here. This system can also extend the life of the tires, because an under inflated tire will cause tire wear and will increase the need for new tires.  When the tire air pressure is even in the tires it also helps the vehicle maintain a higher gas mileage also saving the owner money.  Even though there are some cons to this system, there are many pros to having a vehicle with the tpms system.

Posted on: May 10th, 2015 by

TPMS or tire pressure monitoring systems are necessary because they allow drivers to see when their tires are underinflated. Underinflation is a big problem across the United States and this is because drivers can have a difficult time telling whether the tires are underinflated or not without monitoring technology. Staying on top of the tire pressure levels is one of the most important vehicle maintenance jobs so having the right tools to do it is essential.

What Exactly Does a Tire Pressure Monitor System Do?

What TPMS does is monitor the air pressure level in tires. When the air pressure becomes too high or too low the system signals the driver via a warning light. This light is located on the dashboard of the vehicle so that drivers can easily see it at all times and will be aware when they need to pull over.

What Are the Benefits?

Having a tire pressure sensor provides several benefits that range from safety, tire preservation and improving the fuel economy.

• The safety aspect is obvious: if someone has a blow out because their tires are too low than that could put everyone on the road in danger.It’s been determined by the National Highway Traffic Safety Administration that tire faults cause 533 facilities in the US and more than 100 of these fatalities could be kept from occurring if monitoring systems had been used. That’s a lot of deaths that could be avoided every year if more people were aware of how important it is.

• The more strain that is put on the treads of the tires, the more likely they are to become damaged. Research has shown that the tread life on tires is severely reduced due to underinflation. Even as little as 3% underinflated could reduce the tread life by 10%.

Replacing tires works out more expensive in the long run than purchasing a monitoring system would be. In addition, there’s the fact that replacing tires is a waste of resources so having a monitoring system on tires could be a practical way for individuals to minimize their carbon footprint as it’s recommended in those pages: .http://www.davidsuzuki.org/what-you-can-do/reduce-your-carbon-footprint/drive-smarter-for-a-better-planet/

• Gas mileage could also be lengthened by keeping an eye on tire pressure. It takes more gas when driving on low pressure tires due to a higher level of energy required to set the vehicle in motion and sustain speed. With oil being a precious nonrenewable resource it’s not wise to waste it when something as simple as a monitoring system on tires could save on gas.

Tire Pressure Monitoring System

Responsible driving includes being aware of the problems associated with tire pressure and knowing when the tire pressure is too low or too high to safely drive. Considering that the technology is available and that tire pressure sensor isn’t even very expensive for drivers to buy or for car companies to install in cars during manufacturing, it just makes sense to have it accessible in every vehicle on the road in order to reduce the amount of car accidents and the amount of tires and oil that is wasted.