Posts Tagged ‘TPMS benefits’

Posted on: June 28th, 2016 by

Some drivers have problems with their tire pressure sensor, corroding and going bad.  Many of these sensors are connected to the valve stems on the tires.  Some drivers like to put metal caps for show on their valve stems, this creates a playground for corrosion.  When metals touch each other, such as the cap and the threads, many times corrosion will grow on these metals.  Sometimes it gets so bad that the cap will rust weld itself to the valve stem.  This makes it very difficult to remove the cap from the stem and many times the stem will break off.  This damages the sensors that are attached to the stem.

Damaged Sensors

Other issues that can cause damaged sensors, are when manufactures use brass valve cores inside of the valve stem.  The sensor have aluminum and it will not mix with brass.  The reaction between the two metals will cause the valve core to weld itself to the stem and will be impossible to remove.  The sensor can be easily damaged if the tech is untrained or unaware of how to remove the entire stem.  Another issue that will cause the valve stems to corrode is water and salt off of the roadways.  The stem is nearly always in contact with water, and in the winter there are chemicals and salt that are put on the roads to melt the snow and ice.  When these items get on or into the valve stem corrosion is created.

Achy Breakey Parts:  TPMS And Corrosion

Achy Breakey Parts TPMS And Corrosion

Things That Can Help Prevent Corrosion

  • Be sure that your valve stem cover is make of rubber or plastic and not metal
  • Have nickel coated valve cores installed
  • Have your service technician install a service pack when you have new tires put on
  • Make sure that your service technician knows that your sensor is on your valve stem
  • Use a second generation aftermarket sensor

Keeping Your Sensor Safe

Keeping your tpms system safe is important for your air pressure system. You can also checkout our top article here for more information. These sensors are of the fragile nature and are put in a rough area of your vehicle.  It is important to do the best that you can keeping them from becoming damaged.  When a sensor gets damaged, your air pressure system does not work properly.  You could get a low tire and that sensor will not alert you leaving you in a situation that you could blow a tire or wind up broke down along the side of the road with a flat tire.

Doing what you can do to protect your valve stem will also help to protect your sensor.  Try to make sure that your valve stem stay clean and is capped at all times with a rubber or plastic cap.  Click on our link:http://www.mobilemastertrucks.com/the-evolution-of-tpms-systems-and-the-role-they-play-in-our-safety/ here for more to know. Having the service packet installed every time you have new tires or a tire service done, will also help to prevent corrosion to your valve stem.  Simple procedures like this can help to save your money in the long run and prevent you from having to purchase a new tire pressure sensor.

Posted on: June 28th, 2016 by

The tpms system became a mandate in the United States in 2007 on vehicles that weigh under 10,000 pounds.  This was due to accidents and the law suits against Firestone for their faulty tires.  This is a safety factor for the consumers and vehicle owners.  This system will alert the drivers if there becomes a difference in air pressure in any of their tires, possibly preventing a blow out or an accident due to a tire issue.  Proper air pressure in the tires of a vehicle is very important for the traction and the control of the vehicle.

Types Of This System

There are two different types of this system that is in use in today automobile industry.  One is the direct and the other is the indirect.  The indirect is the most primitive of the two systems, but is widely used because it is more cost effective.  Both systems work and meet the required mandate.  The indirect does not indicate which tire is showing a low pressure and just offers a general warning light.  This can create a problem if there is more than one tire that is showing a problem.  The direct system will show individual tire pressure and alert the driver as to which tire is showing an issue.

How Does My Car Monitor Tire Pressure

Safety In Having One Of These Systems

  • Helps to prevent accidents
  • Alerts the drivers when there is a tire issue
  • Helps to keep control of your vehicle
  • Saves the vehicle owner money in the long run
  • Is required by law in some states in order to pass inspection

Two Types Of Systems

The direct tire pressure sensor is the most preferred of the two systems.  It is the most expensive but the most accurate and is used in most high end vehicles.  In this system there is a sensor that is mounted in each tires air chamber.  Most of these sensors are mounted in the valve stem of the tire, but some are mounted in the form of a band on the inside of the wheel.  Also checkout our top article here. Each sensor has a transmitter that communicates with a receiver that will report the variances that are set for each tire.  The driver is alerted through the instrument panel on the dashboard of the vehicle of any differences in the variances that were set for the tires.

The Indirect is the most primitive but less expensive of these systems.   This system, not actually checking the air pressure in the tires is used as a cost effective method by many automobile manufacturers. In the end click this link:http://auto.howstuffworks.com/car-driving-safety/safety-regulatory-devices/tire-pressure-monitoring-systems.htm here.  This system uses the wheel revolutions and when one of the tires rotates differently, will alert the driver through the dashboard panel of an issue.  When a tire is under inflated it will turn differently than the rest and the sensor will be alerted of the differences.  This system is operated by the ABS sensors and the tpms will alert the driver.

Posted on: June 28th, 2016 by

The tire pressure sensor for automobiles manufacturers has brought on a lot of controversy.  Some of the manufacturers have used the top of line systems and their customers even though they are paying more for this service, they are pleased with the system.  Others are using cheaper versions to save on the cost of the automobiles and the consumers are not really pleased with how these systems are not user friendly.  On a normal the manufacturers of the higher end vehicles are using the better quality systems.  While others are trying to keep the costs of their vehicles down, are selecting the less expensive versions.

Why Are These Systems Good?

This system that is used on cars today, can help to save you life.  You can also checkout for more information here. These systems are designed to alert the driver by a device on the dash board of the vehicle if one of the tires are showing a lower air pressure than is recommended.   Their are various types of this system that are manufactured by different companies.  Some of these are considered as original parts, while others are considered as aftermarket parts.  The aftermarket parts are normally cheaper than the original parts.  It works the same as a brand name and a generic name.

The Pros And Cons Of Tire Pressure Monitoring Systems

Pros Of Using These Systems

  • Can save a driver from having an accident
  • Will help to extend the life of the tires
  • Will help the driver to have more control over his vehicle
  • Will alert the driver if there is an issue with uneven air pressure
  • Will help the vehicle have more traction on the roadways

Cons Of These Systems

Even with the Beru tpms system, there can be cons that will create some issues for the vehicle owners.  Some of these systems that use the valve stems to connect the sensor too, have a risk of the valve stems corroding and cause the sensor to corrode and not work properly.  Some systems will have to be reset when air is added to a tire or new tires are put on the vehicle.  Some of these reset systems can be difficult for the driver to reset, by using a series of buttons being pushed in a certain order.

These systems were created for an additional safety factor for vehicle owners and drivers.  They can help the individual auto owner to the professional businesses that own fleets of vehicles.  When these systems are working properly on a vehicle it will alert a driver that the air pressure in a tire is not to where it should be.  This can prevent being broke down on the side of the road and having to call for a service call.  It can prevent a blow out that can cause the loss of control of the vehicle and even an accident.  In the end checkout our link:http://www.mobilemastertrucks.com/tpms-road-safety-and-cost-savings/ here. This system can also extend the life of the tires, because an under inflated tire will cause tire wear and will increase the need for new tires.  When the tire air pressure is even in the tires it also helps the vehicle maintain a higher gas mileage also saving the owner money.  Even though there are some cons to this system, there are many pros to having a vehicle with the tpms system.

Posted on: August 2nd, 2015 by

It is basic learning that tire pressure sensor that are under-expanded are liable to more prominent wear and tear, and one of the significant reasons for tire disappointment is likewise tire emptying. Under swelled tires are in charge of all the more punctured tires, slipping along the Thruway, tire victories and it additionally takes a more drawn out separation to convey the vehicle to an end, all of which trade off the wellbeing of vehicle travelers and other street clients.

Visual examination whether the pneumatic force in the tires

It is hard to tell by visual examination whether the pneumatic power in the tires is adequate. On the off chance that the prescribed pressure for your tires is 35 pounds, as well as you are running at 25 pounds, then your tires are in actuality essentially under swelled. It may not be quickly evident to a great many people that the pressure inside their tires lacks until the pressure goes down to 20 pounds, and at that point the wellbeing trustworthiness of the tires may be raised doubt about tire pressure sensor.

Execute tire pressure observing frameworks (TPMS)

Street wellbeing concerns brought about the death of enactment that made it required for all automakers to implement tire pressure following structures (TPMS) as a preliminary security measure. TPMS is a framework that empowers data about tire pressure to be transferred to the driver’s dashboard, and at whatever point pressure in one or more tires goes underneath 25 percent of the prescribed pressure as determined by the producer, a notice light will go off.

  • This law, otherwise called the Tread Act, spread vehicles, for example, SUVs, get trucks and additionally smaller than usual vans.
  • TPMS is not new in that for a long time, autos in the hustling circuit have officially actualized the framework as it intends to maintain a strategic distance from potential tire issues on the course.
  • There are numerous TPMS producers in the business sector, and automakers will figure out which framework to use in following the enactment.
  • By the day’s end, the expense brought about is at last gone on to the customer.
  • On top of the beginning expense of the hardware and establishment, there is the upkeep cost that incorporates the substitution of harmed parts and additionally tire repair costs.
  • On the in addition to the side, lessened wearing of the tires and the advantages of mileage to some amplify counterbalance the expense of executing the TPMS

The usage and implementation of the enactment will have a far-reaching impact on the way in which auto tires are being overhauled. Your administration professional will now need to think seriously about the TPMS sensors that are introduced inside the tires at whatever point you have a need to change tires. TPMS sensors will be briefly uprooted and re-introduced all the while, and in this manner they will be re-enacted after the work is finished. Harmed to sensors is additionally a plausibility in the evacuation and re-establishment process, and tire pressure sensor will likewise need to experience a reconstructing procedure to adjust to the new position of every tire after tire pivot.

Reconstructing of the pressure sensors is additionally obliged every time you have battery disengagement. The batteries that power the TPMS sensors will likewise need supplanting, and on top of that, theadministration will obtain new filtering gear focuses on working with the sensors. The consideration of TPMS sensors in tires will mean extra care must be taken by administration specialists when evolving tires, and all that unavoidably implies a redesigning of their attitudes and procedures. Expanded expense for auto support is the outcome, and what was at one time a modest outing to the tire shop might now blaze a little gap in your pocket.

Be that as it may, there is no putting a cost on the security of vehicle travelers and other street clients, and the authorization of the enactment might simply be the way to keeping the following terrible street mischance with tire pressure sensor.

More details in this featured post: http://www.mobilemastertrucks.com/install-new-tpms-on-my-vehicle-how-much-should-it-cost/